Playlist
3:28
0:44
2:39
3:14
Everything This Cable Gives You
A clean, sealed 12V take-off point at your caravan hitch with no splicing, no soldering, and no modifications to your existing wiring.
12V Power At The Hitch
A clean tap-off point right where you need it for TPMS repeaters, wireless cameras, and other hitch-mounted accessories.
Heavy Duty 8AWG Main Leads
8AWG main leads (15cm each side) sit inline with your Anderson plug, keeping the high-current path between tow vehicle and van uncompromised.
Dedicated Positive And Negative Leads
Separate + and - take-off leads (14AWG, 10cm) come off the main cable, ready for direct connection to your accessory.
2 Waterproof SPL Connectors
New SPL waterproof connectors seal against rain, dust, and road grime for reliable long-term use on Australian roads.
No Splicing Required
Skip the scotch-locks and soldering iron. Drop it inline and you've got 12V power without modifying a single wire.
Powers TPMS Repeaters
Mount a TPMS repeater at the rear of the tow vehicle and pull steady 12V from the existing Anderson connection.
Powers Wireless Camera Transmitters
Run a wireless reverse camera transmitter from the hitch without dragging a fresh battery line through the van.
Fully Removable
Unplug it any time to revert to your original Anderson connection. No cuts, no joins, no evidence left behind.
FAQ'S
Frequently Asked Questions
Everything you need to know about adding a 12V take-off point at your caravan hitch.
What does this cable actually do?
It plugs inline between your tow vehicle Anderson plug and your caravan Anderson plug using 8AWG main leads (15cm each side), then brings out a separate positive and negative take-off (14AWG, 10cm) so you can power a 12V accessory at the hitch without cutting into your existing wiring.
Will it work with my existing Anderson plug setup?
Yes, as long as you're already running a standard Anderson plug between your tow vehicle and caravan. The cable simply sits in line with your existing connection.
What can I power from the take-off leads?
It's typically used for TPMS repeaters and wireless reverse camera transmitters mounted near the hitch, but it will run any 12V DC accessory drawing within the cable's safe limits.
Are the SPL connectors actually waterproof?
Yes. The two SPL connectors on the take-off leads are sealed waterproof connectors designed to keep water, dust, and road grime out of the connection.
Do I need to cut or splice any wires to install it?
No. The cable plugs inline with your existing Anderson connection and the take-off connectors mate directly to your accessory. No cutting, splicing, or soldering required.
Can I remove it later if I no longer need the take-off?
Yes. Because nothing has been cut or modified, you can simply unplug the extension and you're back to your original Anderson connection.
How much current can I draw from the take-off leads?
The 14AWG take-off leads are sized for low-draw accessories like TPMS repeaters and wireless camera transmitters, which sit well within safe limits. For higher-draw accessories, please contact us with the load specs and we can confirm suitability.
Is this suitable for permanent caravan installation?
Yes. The waterproof SPL connectors and Anderson plug design are both intended for ongoing outdoor use and will hold up to long-term installation.







I Haven’t used it yet but looks well-made and will do the job if powering the repeater if needed
It’s a great set-up but have not used it yet as I’m waiting on buying a caravan.
Second one I have had to buy. First one was fine. But I lost it on corrugations while on holidays up nth..does what it is meant to do. I just have to secure it better to the car this time..good product..
Perfect for our tpms repeater unit on our car and caravan
Great quality